Universal Marble & Granite
Sales Guidelines:
· A completed diagram and counter top worksheet indicating color and edge detail must be delivered, mailed or faxed to Universal Marble & Granite.
· All walls and cabinets must be reasonably clean, square, and plumb. All cabinets must be permanently secured to the walls and/or floor. All previous counter tops must be removed.
· The customer is responsible for any disconnection and/or reconnect of any plumbing, gas and/ or electrical.
· Sinks, faucets, subtops, support strips and appliances must be on the jobsite prior to templating.
· Wall supports and brackets for overhangs greater than 10 inches must be previously installed.
Labor Scope - Basic Installation
1: In home inspection to verify the layout, measurements, and special installation requirements and templating.
2: Delivery and normal installation of counter top.
3: Includes faucet hole drilling (up to 4 holes)
4: Eased or Radius corners up to 3/4" MAX.
5: Finished exposed ends (flat finish no edge detail) example: next to range or refrigerator.
6: Eased polished edge on back splash (all exposed edges).
7: Standard eased edge included (edge# 10-2cm or Edge# 24-3 cm) from group A edges
8: Final clean up of installation and related debris.
Labor Scope - Optional Work Tasks
1: Granite countertops / back splash 1 1/4" (3cm) Group A
2: Granite countertops / back splash 1 1/4" (3cm) Group B
3: Granite countertops / back splash 1 1/4" (3cm) Group C
EDGE
4: Edge detail per linear foot - Group A 3cm (FREE)
Straight/Eased
1/4 Round
5: Edge detail per linear foot - Group B (3cm)
1/4 Bevel
½ Bevel
Half Bullnose
Full Bullnose
6: Edge detail per linear foot - Group C (3cm)
Ogee
RADIUS
Straight/Eased
1/4 Round
5: Edge detail per linear foot - Group B (3cm)
1/4 Bevel
½ Bevel
Half Bullnose
Full Bullnose
6: Edge detail per linear foot - Group C (3cm)
Ogee
RADIUS
7: Radius Corner / Radius Ends (up to and Including 8" included in basic installation)
Radius Corners up to 18"
Radius Corners up to 30"
Radius Corners up to 42"
Radius Corners up to 18"
Radius Corners up to 30"
Radius Corners up to 42"
SINKS
8: In stock 18 gauge stainless steel sink
#501 (unequal bowl 9” deep)
#502 (equal bowl 9” deep)
#503 (heavy duty unequal bowl)
9: In stock porcelain sink for bathroom vanity tops
#2210
10: Under mount cast iron sink cut out - includes polished edge, mounting and cradle.
11: Under mount stainless steel sink cut out - includes polished edge and mounting.
12: Under mount porcelain sink cut out - includes polished edge and mounting.
13: Top mount porcelain sink cut out - includes polished edge and mounting.
OTHER
#2210
10: Under mount cast iron sink cut out - includes polished edge, mounting and cradle.
11: Under mount stainless steel sink cut out - includes polished edge and mounting.
12: Under mount porcelain sink cut out - includes polished edge and mounting.
13: Top mount porcelain sink cut out - includes polished edge and mounting.
OTHER
14: Outlet cutouts
15: Additional sink cutout or cooktop unpolished (top mount)
16: Additional faucet holes- per hole
17: Removal of existing counter tops and haul away
18: Removal or existing tile counter tops and haul away
19: Mileage beyond 60 miles up to an additional 60 miles round trip
(according to mapquest)
15: Additional sink cutout or cooktop unpolished (top mount)
16: Additional faucet holes- per hole
17: Removal of existing counter tops and haul away
18: Removal or existing tile counter tops and haul away
19: Mileage beyond 60 miles up to an additional 60 miles round trip
(according to mapquest)
Labor Scope - Custom Work Tasks:
Cabinet bump outs
Custom edges on back splash
Cut around post or odd shapes
Labor NOT included:
Disconnect or reconnect of plumbing or electrical
Repair or alterations to existing cabinetry.
Support material for overhang (required for overhangs of 10")
Notes:
1. No work will be done on holidays.
2. An adult must be present at the time of install.
3. Existing countertops must be removed prior to templating.
4. Customer is responsible for payment of $50.00 for a missed field appointment.
5. Customer is responsible for a payment of $150.00 for a missed install appointment.
6. Granite is composed of natural material. Color variations, veining, mineral streaks are
common. This must be reviewed with customer.
7 Customer should be prepared to be without full use of sink and appliances during
installation and 24 hours there after.
Cabinet bump outs
Custom edges on back splash
Cut around post or odd shapes
Labor NOT included:
Disconnect or reconnect of plumbing or electrical
Repair or alterations to existing cabinetry.
Support material for overhang (required for overhangs of 10")
Notes:
1. No work will be done on holidays.
2. An adult must be present at the time of install.
3. Existing countertops must be removed prior to templating.
4. Customer is responsible for payment of $50.00 for a missed field appointment.
5. Customer is responsible for a payment of $150.00 for a missed install appointment.
6. Granite is composed of natural material. Color variations, veining, mineral streaks are
common. This must be reviewed with customer.
7 Customer should be prepared to be without full use of sink and appliances during
installation and 24 hours there after.
